The following cheatcodes are used to affect the booting process of SLAMPP.
Reboot your computer and wait several seconds until nice graphical SLAMPP logo appears. (It's there usually for less then 10 seconds only). You will see "boot: " prompt at that time, under the graphical logo (at the bottom of the screen). Start typing one of the following options immediately to be faster than the timeout, or press F1 for brief help.
disable acpi support. This could fix booting on some broken machines which don't even boot SLAMPP and hangs imediately after loading vmlinuz
disable almost all hardware autodetection in the case of hangups. Your hardware won't be detected at all, you'll have to use "pcimodules" command after logging into SLAMPP and you'll have to try to modprobe all needed modules from the list manually
skip pcmcia hardware detection in the case of hangups
skip agp hardware detection in the case of hangups
disable DMA for all CD-ROMs and disks
don't mount any harddisks at all.
don't search for SLAMPP CD, try only USB and other devices
set root's password to "somepass", or ask (with =ask) for a new password during the boot, before starting SLAMPP (don't worry, the new password won't be shown at the login screen)
copy all files (all required and optional modules) to RAM. You'll need at least 256MB of RAM to do this and boot SLAMPP properly. This will slow down the boot phase but it will speed up SLAMPP!
enable floppy automounting during startup. This option also causes that settings saved by "configsave" command will be restored from the floppy diskette too.
load optional modules from /optional/ directory on the CD. You can use full module name (module.mo) or you can skip the extension
skip SLAMPP login prompt and automatically start X-Window system
enable debug mode, hit Ctrl+D to continue booting
test RAM with memtest (instead of starting SLAMPP)
This document is taken and modified from the original one written for SLAX.